A new serrated fin tube line for HRSG heating surfaces

From serpentine coils to HRSG modules
booyo manufactures serpentine tube coils for Harbin Boiler and Shanghai Boiler and has long supplied Dongfang Boiler. Its work with Shanghai Boiler also covers heating surfaces for heat recovery steam generators (HRSGs) in gas turbine combined-cycle plants. For these projects, the boiler manufacturer’s drawings govern how individual tubes are formed, inspected and fitted together into modules.
Founded in 2007 in Yangliu Industrial Park, Xintai, Shandong, the company employs 1,100 people. Its site covers approximately 867,000 m², including 267,000 m² of production space. Its 2025 production output was valued at RMB 780 million.
The new line joins ten production lines for bare-tube serpentine coils, three for spiral fin tubes and three for H-fin tubes. In-house facilities include digital radiography and a post-weld heat treatment furnace with a usable chamber measuring 5 × 5 × 25 m. Assemblies that fit the chamber can undergo heat treatment on site when the project requires it.
The company holds a Chinese Class A boiler manufacturing licence, ASME S and U authorizations, and Chinese A2 and A3 pressure vessel manufacturing qualifications. Its credentials also include EAC certification under TR CU 032/2013 and a Chinese Grade II general contracting qualification for power engineering.

How the serrated fin is made
The line winds a steel strip helically around the base tube and uses high-frequency welding to join the fin root to the tube wall. Cuts along the outer edge divide the fin into short segments while leaving the root continuous. Fin pitch, serration depth and the quality of the weld at the root are important production checks.
In an HRSG, the fins add surface area on the exhaust-gas side of the tube. The segmented edges disturb the gas flow along the fins and can improve heat transfer. Designers select the fin geometry and tube spacing together to meet the required heat duty within the allowable gas-side pressure drop.
One production example pairs a 12Cr1MoV alloy steel base tube with Type 409 stainless steel fin strip. The tube and fin materials are specified separately to suit their respective service conditions.
- Base tube — 38 mm outside diameter × 3.8 mm wall thickness
Fin strip — 1.0 mm thick × 16 mm wide, ASME SA-240 Type 409


Identification that travels with each tube
Before dispatch, each tube receives a label on its bare end. The label lists the project, production order, drawing number, tube and fin-strip dimensions and materials, and batch quantity. The receiving team can match an individual tube to the relevant drawing and production record even after a bundle has been opened.
Protective caps keep debris out of the bore and shield the prepared tube ends during handling. The finished tubes are bundled and separated with timber spacers for transport.


Supply from individual tubes to assembled modules
With serrated fin tubes now in production alongside bare-tube coils, spiral fin tubes and H-fin tubes, booyo can supply individual components, fabricated tube banks or assembled heating-surface modules to the boiler manufacturer’s drawings. These capabilities serve utility boilers, gas turbine HRSGs and waste heat recovery projects in the chemical and metallurgical industries.
